PropellerMan Logo

Supplying all major American Aircraft Propellers- McCauley- Hartzell-Sensenich Metal-Sensenich Wood 

Propeller Tips

Maintenance guidelines

For additional propeller tips and advice, contact us today and speak with our staff.

Propeller Tips
1. Use Restraint in Removing Nicks
We frequently see airplane propellers that have been filed below minimums in the field. In an overhaul, the Professional Propeller Technician (PPT) is trained to remove just enough to smooth all of the dings and blemishes. Even a PPT can cause an aircraft propeller blade to go below minimum thicknesses to where a blade will be scrapped. Leave as much blade diameter, thickness, and width as possible for the PPT to utilize during overhaul. We want your propeller to make overhaul!

2. Wash Your Propeller Daily
While it is a good idea for every owner to wipe down a propeller after use, it is absolutely critical for the Ag plane owner to remove the caustic chemicals that build up with each use.

3. Send Your Prop to a FAA Certified Repair Facility for a Midlife Inspection
Keep in mind that even though your propeller appears to be functioning, internal corrosion (especially in humid climates) could be destroying your propeller. Catch corrosion early! While conducting a Midlife Inspection, have your propeller resealed. During a reseal the propeller is taken completely apart, a visual corrosion inspection is conducted and all the seals are replaced. Usually the propeller is repainted and balanced at this time as well. This relatively inexpensive procedure (half the cost of an overhaul) can add life to your propeller through the early discovery of corrosion and other problems that can destroy your propeller.

Aerial, Aircraft Propellers in Kissimmee, FL

4. Paint Your Airplane Propeller
Paint helps protect your aircraft propeller. A "dress and paint" by a professional will add life to your airplane propeller. This procedure can be done more frequently, but the mid life inspection is a convenient time to get your propeller painted.

5. Never Attempt to Straighten an Aircraft Propeller Blade Yourself
Straightening your own airplane propeller blade is illegal for a good reason. Compromised metal is very dangerous. Let the experts straighten your blade and determine if the propeller is safe to put back on your aircraft. When it comes to propeller maintenance, never were the words "better safe than sorry" truer.

6. Look at Your Manufacturer's Guidelines before Attempting to Grease Your Own Propeller
Over-greasing your propeller can potentially cause an out of balance condition. Review your manufacturer's general guidelines on how to grease your propeller.

Transportation, Aircraft Propellers in Kissimmee, FL

7. Check Propeller Tracking Frequently
If your propeller has been bumped or compromised, check the tracking. A change in tracking can be unnoticeable or cause severe vibrations. Improper tracking will cause the propeller to feel out of balance but the cure is distinct from balancing. While the mechanic can check the propeller tracking, once discovering your propeller is out of track, a PPT must realign it for you.

8. Keep Your Propeller Balanced—Both Statically and Dynamically
A Static Balance is routinely performed on every propeller by a Certified Propeller Repair Station (CPRS) during an overhaul, mid life inspection or even during a simple Dress and Paint. A Dynamic Balance is performed on a plane with the engine running. Because CPRSs (or other Maintenance Facilities) charge additional fees for this service and because it is not "required," the owner often chooses not to have this service performed. Penny wise but pound foolish! A Dynamic Balance will help mate the prop and the crankshaft together, save the bearings in a crankshaft, and enable the entire engine to run more smoothly.

9. Be on the Alert for Oil or Red Dye
If you spot oil or red dye, try to locate the origin of the leak. The propeller is not always the source of the leak. Engine oil leaks caused from mounting the O-ring or crankshaft seal are often blamed on the propeller. If red dye is evident, the propeller must be removed from service and sent for repair. Depending on the model of the prop and per the manufacturer's instructions, you are allowed to see if the propeller will seal itself. As long as you are not faced with a severe leak of red dye, you may fly a couple hours "to get where you are going." Hardworking, watch-the-bottom-line AG Pilots are often reluctant to bring their propeller in for professional inspections. The down time and expenses are delayed because the ever present fear is, "What if they scrap or red-tag my propeller?" The best strategy is to take care of your propeller and when you notice irregularities, have a professional look at your propeller immediately. A properly maintained propeller will have the longest life and save you money in the long run. Lastly, manage the work your repair station performs on your propeller. Ask for a full inspection report before they begin work that includes price quotes on both labor and parts. You have a right to examine any scrapped parts and you are entitled to a full explanation of why those parts scrapped. Get price quotes from more than one repair shop and be sure to use a reputable Certified Propeller Repair Station.

Get the maximum life out of your aircraft propeller by following these propeller tips